Why smart facility management?

Traditional facility management runs on fixed cleaning schedules — staff visit whether needed or not, run out of supplies between visits, miss leaks for hours, and can't prove hygiene SLAs. IoT sensors flip this to condition-based maintenance: clean when needed, restock before empty, alert on leaks immediately, generate auditable hygiene reports automatically.

🧻 Consumables — soap & toilet paper

WS201 — Smart Fill Level Monitoring Sensor

The core restroom consumables sensor. ToF laser measures how full a toilet paper or soap dispenser is — outputs percentage directly, no distance calculation needed.

Use cases: Toilet paper roll level per cubicle, liquid/foam soap dispensers, paper towel dispensers, hand sanitiser dispensers in lobbies.

🚽 Cubicle & restroom occupancy

VS330 — Bathroom Occupancy Sensor

Per-stall occupancy monitoring for individual toilet cubicles, accessible bathrooms, and fitting rooms. Combines ToF + PIR for >99.5% accuracy, 100% anonymous.

Use cases: Live stall availability display boards, usage counting per stall, cleaning trigger by usage count, accessible stall monitoring in airports and malls.

🌡️ Odor & air quality

GS301 — Bathroom Odor Detector (4-in-1)

GS601 — Vape Detector

Detects e-cigarette/vaping aerosol. Sends immediate LoRaWAN alert. For restrooms, changing rooms, and school toilets where vaping is prohibited.

💧 Leak detection

WS303 — Mini Leak Detection Sensor

EM300-SLD / EM300-MLD

EM300-SLD: spot sensor for plant rooms, behind toilet banks. EM300-MLD: flexible membrane strip that lays along pipe runs or across large floor areas — detects moisture across the full membrane length.

🗑️ Waste bin monitoring

EM400-TLD — ToF Laser (small bins)

Designed for small and mini bins — desk bins, individual office bins, small restroom waste bins. Almost zero blind spot. Bin Mode pre-configured. Detects: fill level + lid status (open/closed) + trash combustion (fire/smouldering). IP67. LoRaWAN or NB-IoT.

EM400-MUD — Ultrasonic (medium/large bins)

For wheelie bins, corridor litter bins, large restroom sanitary waste containers. 3–450cm range. Detects: fill level + bin lid status (3-axis accelerometer) + trash combustion (NTC thermistor) + tilt/knock detection. Battery life up to 10 years. IP67. LoRaWAN or NB-IoT (NB-IoT version adds GNSS tracking).

Three pre-set modes: Standard / Bin Mode / Parking Lot Mode.

EM310-UDL (legacy)

Dual ultrasonic, 3–450cm, 3-axis accelerometer, IP67. End-of-life — Milesight recommends EM400-MUD for new deployments. Fully supported for existing installations.

🧹 Cleaning trigger — usage-based dispatch

VS133 — AI ToF People Counter (restroom entrance)

Counts actual visitors entering/leaving the restroom. Every N visits (configurable) triggers a cleaning recommendation in Vemcount. No more fixed-schedule cleaning, no more missed high-traffic surges. See VS133 setup guide for installation details.

WS101 — Smart Cleaning Request Button

Battery-powered LoRaWAN button. Single press / double press / long press each trigger different events. No wiring — adhesive mount installs in minutes. Use cases: visitor-triggered cleaning request, staff cleaning complete confirmation (long press), emergency maintenance alert.

📊 Complete smart restroom stack

Vemcount IoT dashboard for facility management

• Consumables map — live % fill for every dispenser on a floor plan. Red when below threshold.

• Usage-based cleaning triggers — alert after N visits. Log cleaning completion via WS101 button press.

• Leak alerts — immediate notification to facility manager on any WS303/EM300 trigger.

• Bin fill map — floor plan view showing which bins need emptying across the building.

• Odor alerts — NH₃/H₂S threshold breach triggers immediate cleaning dispatch.

• Hygiene reports — automated daily/weekly reports: cleaning events, consumable usage, sensor event history for SLA evidence and tenant reporting.