AXIS Sensors - Vemcount Firewall Guide

Purpose: This guide outlines the outbound firewall and network access required for AXIS sensors to communicate correctly with Vemcount services.

Important: All firewall rules should be configured for outbound connections only. DNS resolution for the listed hostnames should also be allowed.

Required network access

Service

Hostname / URL

Port(s)

Purpose

MQTT data connection

mqtt.vemcount.com

1883

Transmission of AXIS Object Analytics event data to Vemcount via MQTT

Time synchronization

ntp.vemcount.com

123/UDP

Time sync for stable and accurate operation

License validation

license.vemcogroup.com

443

License checks and validation where relevant in the Vemcount environment

AXIS setup note: The official AXIS Object Analytics guide specifies MQTT Host: mqtt.vemcount.com, Port: 1883, Username: vemcount, and Password: mqtt. It also states that event interval should be enabled in the AXIS application and that the sensor MAC address must be added in Vemcount before counting starts.

Additional setup notes

Configure AXIS Object Analytics to send data over MQTT to mqtt.vemcount.com on port 1883.
Use the credentials from the official guide: username vemcount and password mqtt.
Enable event interval in the AXIS application so event counts are sent correctly.
Add the sensor MAC address in Vemcount before the counting starts.

Main Vemcount IP addresses

18.195.189.44
15.197.146.64
3.33.145.212

7PM

GMT+2

7PM

GMT+2

7PM

GMT+2

Who We Are

Aliquam Dui Diam, Tincidunt Eget Nulla Eget, Dictum Feugiat Felis. Cras Mattis Eget Tellus Quis Fringilla. Morbi Molestie Enim

Aliquam dui diam tincidunt eget nulla eget dictum feugiat felis.